Thermostat Settings | What Does Hold Mean on Thermostat (2024)

FAQs

Thermostat Settings | What Does Hold Mean on Thermostat? ›

By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. Convenient, right? Programmable thermostats are a great technological innovation.

Using the “hold” function on your system means you can suspend the program if you'll be away from home for a while, such as while you're on vacation. This means you can tell your HVAC to stay put at a specific temperature to keep your pipes from freezing in winter but as warm as you want it to be for comfort.

So if you know you are going to be home for the day, you can press the hold button in the morning and keep your home comfortable all day long. As soon as you want your home to go back to its normal programmed settings, you simply hit the “run” setting and everything will go back to normal.

If your thermostat is on a hold setting and you wish to remove the hold, simply check for “Cancel,” “Run,” or “Run Schedule.” Depending on your thermostat model, the specific run button you need will be labeled differently.

When to Set Your Thermostat to Hold. You should consider setting your thermostat to hold whenever you want to temporarily override its heating and cooling schedule. Programmable thermostats are convenient. Instead of manually adjusting the temperature each day, you can program a schedule.

In other words, a Hold is a command that overrides the set temperature. A hold can be either permanent or temporary. A permanent Hold will keep the temperature held at the set level until it is manually overridden by changing the temperature.

There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.

If your thermostat has a recessed reset button, press it in with a paper clip, holding it in for 5 seconds before release. If neither of the above methods work, turn your thermostat to the 'off' position. Then go to your home's circuit breaker box.

Some of the most common thermostat issues include: The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.

Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.

Why does my thermostat go up when I turn it down? ›

Swap out the batteries and see if that corrects the thermostat readings. If the batteries are good, then look at other power sources in your home like blown fuses and tripped breakers. If you suspect that the issue may be a breaker or fuse, you may need to hire an electrician to fix the problem.

Temporary hold lasts until the next scheduled program period.

There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.

Due to corrosion or aging, your car's thermostat can get stuck in a closed position. If this happens, the thermostat will not let the coolant reach the radiator, and, as mentioned above, the engine will overheat, causing severe damage. One of the lesser-known issues is the polar opposite of overheating.