What size is 1/12 scale figure?
The 1:12 scale is a traditional scale (ratio) for models and miniatures. In this scale (ratio), one inch on the scale model or miniature is equal to twelve inches on the original object being copied.
For starters, the Mezco Toyz action figure is 1:12 scale which puts most figures at roughly 6 inches tall.
A 1:12 scale model is 1/12nd the size of the real one. 1:12 scale: Very large, highly detailed models; usually about 14 or 15 in (36 or 38 cm) long; mainly targeted at adult collectors. These models are generally much more expensive than the 1:18 models. Many diecast motorcycles are also produced in this scale.
In metric, 1:12 scale uses one centimeter of the model as the equivalent to twelve centimeters of the original, but as 12 centimeters doesn't translate easily to any common segment of metric measure, the scale is slightly more difficult to mentally compute.
THE THEORY OF SCALE CONVERSION. The concept of miniature scale is fairly basic. A scale of 1:X means taking a real-life measurement in inches, and dividing it by X. As you can see from the above table, 1:6 scale is twice as big as 1:12 scale.
The 1:12 scale is a traditional scale (ratio) for models and miniatures. In this scale (ratio), one inch on the scale model or miniature is equal to twelve inches on the original object being copied. Depending on the application, this particular scale (ratio) is also called one-scale (since 1 inch equals 1 foot).
1:12 scale is sometimes called one-inch scale and means 1 foot (or 12 inches) on a real item that has been scaled down to 1 inch. If you measure the ceiling in your house and it's 10ft, it would be 10in in the dolls house.
Scale model sizes are ratios of size comparisons showing the degree to which a model has been scaled down from the original. For example, 1:24 scale means the model is 1/24th the size of the original object. The larger the second number, the more the model has been downsized.
For easy reference, the Scale Conversion Chart shows decimal equivalents for common modeling scales. To find the scale multiplier factor, divide the model's decimal scale equivalent by that of your drawing's. For example, if our model is 1/35 scale, we found our decimal equivalent to be . 0286.
You measure the 1:1 bookcase and it's 80 inches tall. You want to make a 1:12 scale version. You divide 80 by 12 and get 6.666667 or 6 and 2/3 inches. That's the height of the 1:12 bookcase–easy peasy!
How big is a 1/12 scale RC?
Different Scale Model Sizes
* Models with a 1:12 ratio will start around 14 inches and can be as large as 16 inches.
1:8 - 60 cm (24 in) long. 1:5 - 92 cm (36 in) long. 1:4 - 120 cm (48 in) long.
1/16 World Figure Series. At approximately 120mm tall, the figures in this series come in the popular 1/16 scale and boast natural, lifelike poses as well as vivid facial expressions for a superb level of realism.
Featuring an alternate embarrassed faceplate, this 1/7 scale figure measures about 9.5" tall.
Items in 1:6 scale, also known as "Playscale" or "Fashion Doll" scale, are sized to fit with common fashion dolls such as Barbie or collectible action figures, principally military action figures. In this scale, 1 inch is equivalent to 6 inches in full size.
The larger the scale, the smaller the denominator; a 1/16 scale toy is much larger than a 1/87. “Scale” doesn't refer to actual size. For example, a 1/16 scale toy could measure 8, 12, or 14 inches long.
1:24 means that a unit of measurement, such as one inch or one centimeter, on the model represents 24 units on the actual object. An example would be one inch of length on a model automobile would represent 24 inches on the real vehicle.
Contemporary children's play dollhouses are mostly in 1:18 (or 2/3") scale, while 1:12 (or 1") scale is common for dollhouses made for adult collectors.
18" American Girl dolls are 1:3 scale - which is double Playscale.
A standard Barbie doll is 11.5 inches (29 cm) tall, giving a height of 5 feet 9 inches (1.75 m) at 1/6 scale. Barbie's vital statistics have been estimated at 36 inches (chest), 18 inches (waist) and 33 inches (hips).
What size is 1/18 scale in inches?
How big is a 1 18 scale model car? The scale size 1:18 is one of the biggest size of scale model cars and is DNA Collectibles most popular scale. How big is 1 18? Model cars in this scale are between 10 (250 mm) and 12 (300 mm) inches in length, and by definition, it is said that it is 18 times smaller than a car.
Other Scales 1:10 (7 inch)
Although 3.75" was the standard in this scale, a proper 1:18 scale figure should be 4", and a recent resurgence in popularity of this size has brought us several new figure lines from Marvel, DC Comics, G.I. Joe and Star Wars.
Divide the real life dimension of either length or width by that of the model. So, say the real life object had a length of 55m, and the model had a length of 50 cm, or 0.5m, then do 55/0.5. This is equal to 110.
1:18 scale is a traditional scale (ratio) for models and miniatures, in which 18 units (such as inches or centimeters) on the original is represented by one unit on the model. Depending on application, the scale is also called two third inch scale since 1 foot is represented by 2/3 of an inch.
Runway models must have precise measurements so they're able to fit the clothes that designers are going to be showing to their clients. Their measurements are usually no greater than 34 inches around the bust, 23 inches around the waist, and 34 inches around the hips.
Size is the physical dimensions of an object. Scale is the relative size of different objects in relation to each other or a common standard.
4-inch action figures. Also used for most plastic toy animal figures and Ertl's toy farm sets (animals, structures, and most vehicles). The Hasbro 3.75-inch G.I. Joe figures' vehicles are closer to this scale.
Although 3.75" was the standard in this scale, a proper 1:18 scale figure should be 4", and a recent resurgence in popularity of this size has brought us several new figure lines from Marvel, DC Comics, G.I.
Marvel Legends is an action figure line based on the characters of Marvel Comics, initially produced by Toy Biz, then by Hasbro. This line is in the 6-inch (150 mm) scale, with spin-off lines in the 4-inch (100 mm), 8-inch (200 mm), and 12-inch (300 mm) scale.
