Quick Tips
This shouldn't hurt.Tucking can be uncomfortable at first. If you're in pain, something's up. Talk to your doctor if you have circulatory or skin related conditions, and never tuck with damaged or bruised skin
Sensitive skin?Our product is latex-free and hypoallergenic. That said we do recommend testing on a small area before full application, if you have any doubts
Shaving:You don't need to be bald down there to use T-Tape, but you do need to trim. Our product is tested to work well with up to 2mm of hair, which is about the thickness of two credit / debit cards
Application:The product stays best when it is applied flat against the skin & set for 30 min.For best results, apply to freshly cleaned skin that is towel-dried and free of sweat, oils, creams, or lotions
Swimming & Exercise:Be sure to follow application steps above and let the product set to your skin before strenuous activity or exercise. Product is water-resistant for up to 4 hours once applied. Product may not re-adhere after swimming or intense exercise. Findmore swimming tips here.
Bathroom Breaks:We all do it. To use the restroom, simply remove the back portion of T-Tape, peeling down and forward, while being careful to hold it flat. While you go, you canfollow these tips to make sure the product stays ready for re-application.Most find that they can peel and re-apply the back at least once before changing the T-Tape strip entirely.
Removal:Always remove in two passes, peeling first from the front, and then from the back
Post-tuck care:Depending on duration of wear, temperature, and relative humidity, T-Tape may leave skin feeling a little sticky. Although our adhesive is designed for skin, this still may occur. Not to worry: you can gently lift away any stickiness by using a washcloth with a dab of baby oil or mineral oil
Take your time.It may take practice to get the fit just right. Review the card that comes in the box. It'll come in handy!
The Crease:Looking to create that subtle crease down the center of the tuck? It takes practice.
Here's how >