Let there be light! At the flick of a switch, a light bulb can light or illuminate an entire room, but what else is happening? One the basic laws of physics, the conservation of energy, tells us that energy is neither created nor destroyed: rather, it can only be transformed from one form to another. In the case of the light bulb, electrical energy is being transformed into light and thermal (heat) energy. Different wattages and types of bulbs give off varying amounts of light and heat. In this light bulb science project, we'll be working with incandescent and compact fluorescent lamp bulbs (CFL’s).
Problem
What type of bulb and wattage produces the most heat?
Grade
Subject
Science
Materials
- A goose-neck style lamp (make sure it can safely use all light bulbs listed!)
- 6 Incandescent light bulbs: 25 watt, 40 watt, 60 watt, 75 watt, 100 watt, and 150 watt
- 2 Compact Fluorescent light bulbs: 7 watt, 23 watt
- Thermometer
- Measuring tape or yard stick to measure distance between the thermometer and light bulb
- White towel
- Stopwatch
- A piece of paper and pencil to record your observations
Procedure
- Lay out the white towel on a flat table.
- Place the lamp on one end of the towel.
- Making sure the lamp is unplugged, screw in lowest wattage bulb and keep the lamp turned off.
- Place the thermometer at the other end of the towel.
- Measure the distance between thermometer and light bulb.
- Check and record starting temperature of thermometer.
- Making sure the lamp is pointed at the thermometer, turn the lamp on and start the stopwatch.
- After 5 minutes have passed, measure and record the temperature on thermometer.
- Turn the lamp completely off and wait for the light bulb to cool down before removing it.
- Make sure that the thermometer has also cooled down to the initial starting temperature you recorded.
- Repeat steps 2-9 with the next highest wattage bulb until you’ve tested all the bulbs.
**Things to Remember**
- Always wait for the bulb and thermometer to cool down before testing any new bulbs!
- Be sure the lamp is turned off and unplugged completely when switching bulbs.
- Make sure distance between bulb and thermometer is the same for each trial.
- The starting temperature should always be the same for each trial.
Observations & Results
What did you observe? You may have noticed that the higher the wattage, the highter the temperature. The 150-watt incandescent bulb should have yielded your warmest measurement (Why do you think this is?), while the CFL’s should have been much cooler than most of the incandescent bulbs.
Why?
So what’s the difference between incandescent bulbs and compact fluorescent bulbs? An incandescent bulb emits light through the heating of a small metallic coil called a filament surrounded by gases that heat to approximately 4000 F! While providing plenty of light, they release 90% of their energy as heat making them fairly inefficient in comparison to compact fluorescent lamp bulbs.
Compact fluorescent bulbs create invisible UV light that interacts with the coating of the bulb in order to create visible light. They are known to be more efficient and longer-lasting (and as you may have noticed, take longer to heat up).
Conclusion
Incandescent light bulbs burn much hotter than compact fluorescent light bulbs do. They possess very different properties—incandescent bulbs rely upon metals, gas and heat, while CFL’s rely more upon a reaction between the internal and outside materials. For these reasons, incandescent lights emit more heat energy than CFL’s.
Disclaimer and Safety Precautions
Education.com provides the Science Fair Project Ideas for informationalpurposes only. Education.com does not make any guarantee or representationregarding the Science Fair Project Ideas and is not responsible or liable forany loss or damage, directly or indirectly, caused by your use of suchinformation. By accessing the Science Fair Project Ideas, you waive andrenounce any claims against Education.com that arise thereof. In addition, youraccess to Education.com's website and Science Fair Project Ideas is covered byEducation.com's Privacy Policy and site Terms of Use, which include limitationson Education.com's liability.
Warning is hereby given that not all Project Ideas are appropriate for allindividuals or in all circ*mstances. Implementation of any Science Project Ideashould be undertaken only in appropriate settings and with appropriate parentalor other supervision. Reading and following the safety precautions of allmaterials used in a project is the sole responsibility of each individual. Forfurther information, consult your state's handbook of Science Safety.
Related learning resources
Heat Conduction
Examine which metal conducts more heat by boiling water in 3 pans made of aluminum, copper, and stainless steel.
4th grade
Science project
Heat Waves
Learners will discover what heat waves are, and how they are connected to global warming, in this two-page earth sciences worksheet.
4th grade
Reading & Writing
Worksheet
Color and Heat Absorption
The objective of this science fair project is to observe the differences in heat absorption for darker colors vs. lighter colors.
3rd grade
Science project
Angle of Heat
Science fair project which compares the rate of temperature change and the maximum temperature as a result of the angle of light radiation.
4th grade
Science project
Let The Sun Shine In!
This science fair project idea investigates if heat from direct sunlight is hotter than heat from reflected sunlight.
5th grade
Science project
Using Mirrors in the Garden: Measuring Light Reflection
Can you increase the light and plant growth in your garden using mirrors? In this experiment, measure light reflection and find out!
4th grade
Science project
Does The Color of Light Affect Plant Growth?
This science fair project idea determines if the color of light affects the growth of plants.
4th grade
Science project
Electricity: Sources and Functions
Your child will learn how electricity is made and used by drawing pictures of household products that use electricity to create light, heat, and motion.
4th grade
Science
Worksheet
Inverse Square Law: How Does Distance Affect the Spreading of Light?
How does distance affect the spreading of light? Kids see diffraction and the inverse square law of light in action with this great science fair project idea.
4th grade
Science project
Red Light, Green Light Questions
...Then, read the questions from the green light column....
3rd grade
Reading & Writing
Lesson plan
Are There Other Animals that Glow Under a Black Light Besides Scorpions?
Check out this cool science fair project idea to explore which other common animals besides scorpions glow under a UV Black light.
4th grade
Science project
Monster Light
...monster light, nightlight, Halloween light, monster, draw a monster, monsters, Halloween monsters...
5th grade
Arts & crafts
Activity
As a seasoned enthusiast and expert in the field of physics and energy conservation, I'm well-versed in the principles that govern the transformation of energy from one form to another. In this context, the science project titled "Let there be light!" explores the fascinating interplay of electrical energy, light, and thermal (heat) energy within the framework of the conservation of energy.
The project investigates the heat production of different types of light bulbs, specifically incandescent and compact fluorescent lamp bulbs (CFLs), across various wattages. The setup involves a goose-neck style lamp, six incandescent bulbs ranging from 25 to 150 watts, two CFLs of 7 and 23 watts, a thermometer, measuring tape, a white towel, a stopwatch, and a recording tool.
The experimental procedure is meticulously outlined, emphasizing the importance of consistency in factors such as distance between the bulb and thermometer, waiting for the bulb and thermometer to cool down, and ensuring the lamp is turned off and unplugged during bulb changes.
The observations and results of the project reveal a direct correlation between the wattage of the bulbs and the temperature they generate. Higher wattage bulbs, such as the 150-watt incandescent bulb, produce more heat compared to lower wattage bulbs and CFLs. The explanation lies in the fundamental differences between incandescent and CFL bulbs.
Incandescent bulbs generate light by heating a metallic coil (filament) surrounded by gases to a high temperature, releasing 90% of their energy as heat. In contrast, CFLs create light through the interaction of invisible UV light with the bulb's coating, making them more efficient and longer-lasting.
The conclusion drawn from the project is clear: incandescent light bulbs generate more heat than compact fluorescent bulbs due to their reliance on metals, gas, and heat, as opposed to CFLs, which leverage a reaction between internal and external materials.
This experiment not only provides hands-on experience with the principles of energy transformation but also sheds light on the practical implications of choosing different types and wattages of light bulbs in terms of energy efficiency and heat generation.
For those interested in delving deeper into related concepts, exploring projects on heat conduction, color and heat absorption, and the angle of light radiation could offer additional insights. Understanding the science behind light and heat has wide-ranging applications, from energy-efficient lighting choices to broader considerations of heat in various scientific contexts.