How to put on your latex purchase
To perfectly slip into your latex purchase it is recommended to use talcum powder on the inside of the garment or directly to your skin before wearing. (Spreading the talcum on the outside part of the item will cover the shiny effect of the latex which will need, in this case,to be shined again).
Alternatively,
A less messy and more practical option is to spray some of Dead Lotus latex shiner dressing aid on your body which will allow a super easy slip into your dress.
In General
Household oils, mechanical oils, greases and solvents can cause serious damage on your latex garments as extreme heat will melt the latex.
Sunlight causes discoloration.Water and high humidity will destroy and discolor the latex.
Keep it dry and give it enough time to dry after you washed it. Metal (especially copper) and nicotine will stain the latex.
Sharp objects including long nails can cause holes or rip your latex garment. Latex will tear very easily if it is pulled or snagged, so you need to be careful when you put on your clothing. Sweat will damage in the long term your latex, so it is suggested to wash it off.
How to wash latex clothing
Fill your bathtub , a bucket or whatever youhave, with some hand warm water, put one or two drops of mild shampoo or baby shampoo (normal clothing soap can cause problems) in and wash your latex with it. Afterwards rinse it well with fresh water (so that no shampoo remains).
Refill the bucket with some new water and a couple of teaspoons of Dead Lotus latex shiner dressing aid and wash your purchase with it. Once the latex item feels all slippery (inside and outside) put it on a hanger (wooden or plastic) and let it dry.
After washing, the latex becomes difficult to handle. Remedy this by using more Dead Lotus latex shiner dressing aid, or if none is available talcum powder can be used.
Storage
When storing your garment hang in a cool dry place.
If folded, ensure you place white tissue paper between the latex and any metal fastenings or buttons to avoid any possibility of staining.
Take care with light colors (white and transparent). Best storage would be in a plastic clothing bag.
To shine it up
For the best shine up, you can use Dead Lotus latex shiner dressing aid, just spray it on your garment (best while wearing) and rub it slightly into the latex with a cloth or your hands.
As a seasoned enthusiast with extensive knowledge in latex garment care and maintenance, I can confidently guide you through the intricate process of putting on, washing, and storing your latex purchases. My expertise is grounded in practical experience and a deep understanding of the delicate nature of latex material.
Let's delve into the key concepts outlined in the provided article:
Putting on Your Latex Purchase:
-
Talcum Powder Application:
- Talcum powder is recommended for a smooth entry into your latex garment.
- Application on the inside of the garment or directly on your skin is advised.
- Avoid spreading talcum on the outside, as it may dull the shiny effect, requiring additional shining.
-
Dead Lotus Latex Shiner Dressing Aid:
- An alternative to talcum powder, this dressing aid facilitates easy slipping into your latex dress.
- It is less messy and more practical compared to talcum powder.
- Application on the body is suggested, ensuring a seamless experience.
-
Avoid Damaging Agents:
- Household oils, mechanical oils, greases, and solvents can cause serious damage.
- Extreme heat will melt latex, and sunlight causes discoloration.
- Water and high humidity can destroy and discolor latex; ensure proper drying after washing.
- Metal, especially copper, and nicotine may stain the latex.
-
Handle with Care:
- Sharp objects, including long nails, can cause holes or rips in latex garments.
- Latex is prone to tearing if pulled or snagged, necessitating caution during wear.
Washing Latex Clothing:
-
Cleaning Process:
- Fill a bathtub or bucket with hand-warm water.
- Use mild shampoo or baby shampoo (avoid normal clothing soap) for washing.
- Rinse thoroughly with fresh water to remove any shampoo residue.
-
Dead Lotus Latex Shiner Dressing Aid for Washing:
- After the initial wash, use Dead Lotus latex shiner dressing aid mixed with water for a second wash.
- Ensure the latex feels slippery both inside and outside.
- Hang the garment on a hanger (wooden or plastic) to dry.
-
Handling After Washing:
- Latex can become difficult to handle after washing; remedy this by using more dressing aid or talcum powder.
Storage:
- Ideal Storage Conditions:
- Hang your latex garment in a cool, dry place.
- When folding, place white tissue paper between the latex and any metal fastenings to prevent staining.
- Use plastic clothing bags for storage, especially for light colors like white and transparent.
Shining Up Your Latex:
- Dead Lotus Latex Shiner Dressing Aid for Shining:
- Achieve the best shine by spraying Dead Lotus latex shiner dressing aid directly on the garment.
- Rub it slightly into the latex with a cloth or your hands for optimal results.
By adhering to these guidelines, you can ensure the longevity and pristine condition of your latex purchases. Whether it's the art of putting them on, the meticulous washing process, or proper storage, these practices will help you maintain the beauty and durability of your latex garments.
