Cuffing your pant legs can bring style to almost any outfit or perfectly accentuate your kicks. But there’s methodology behind every cuff, and it all starts when you buy a pair of pants. Make sure to buy an inseam length that is one to two inches longer than your normal inseam, giving you plenty of space to make the cuff without turning your pants into capris. Cropped pants are cool but usually only in summer months, when you can wear huaraches, loafers or sandals without worrying about freezing your feet and ankles off.
Related Stories
Denim weights are also important to keep in mind. Denim weight refers to how much the fabric weighs per yard. So, a pair of 12.5-ounce denim jeans are made from a material that weighs 12.5 ounces per yard. The heavier the weight, the thicker the material and the more durable. We recommend not going higher than 14.75 ounces when cuffing your pant leg (and that goes for duck canvas as well).
If you go upwards of that, the material doesn’t take the fold as readily and can bunch up, making your pants look less cuffed and more rolled (in a bad, not so becoming way). As for the cut of the pant, you can try wider, boot-cut styles if that's what you usually wear, but be warned that cuffs added to already wide pants will look even wider, because although you can technically cuff any cut of pant, it works best with ones that are straight or slightly tapered. Lastly, if you dress for an era that isn't your own, meaning your closet is full of vintage or period-specific shapes, it's OK to leave the cuff a little messy; it adds character.
Why You Should Cuff Your Jeans
Over the years, jean cuffing for aesthetic purposes has grown and fallen following popularity and trend status. Cuffing your jeans is a way to show off your personal style. But, even if you're not into styling yourself along the trends, cuffing your jeans is a way to keep the hems at the bottom from fraying and accumulating dirt; this allows your jeans to last longer. It's also a way to make a too-long pair of jeans appear the right length.
How To Make Sure Your Jeans Stay Cuffed
When cuffing your jeans, start by folding the hem of the leg over the inseam vertically (and inverted), and then continue by doing a singular cuff about 1.5 inches big, while holding the initial fold with your thumb (this helps ensure that the cuff is nice and tight), and then continue until your desired cuff height. All of this varies according to your desired height and the denim's stiffness or looseness.
The Four Most Common Cuff Types
- The Pinroll (for low-top shoes)
- The Simple Roll (for all jeans)
- The Skinny Roll (for tighter jeans)
- The Iron Worker (for wide-fitting jeans and boots)
The Pinroll
The Pinroll works best with shoes that are slimmer and narrower, like oxfords or simple white sneakers. Stay away from the pinroll with boots or bulky sneakers with a thick sole.
Step 1
Take about an inch of fabric between your thumb and forefinger on the instep side of your pants so that the rest of the hem is snug against your ankle.
Step 2
Fold the material towards you, against the leg, to create a diagonal line of material.
Step 3
Cuff the pant by making two folds of the hem. Make sure to smooth out the cuff as you make each fold.
Looks best with:
Puma Suede Classic XXI Men's Sneakers
skimresources.com
$75.00
The Simple Roll
The Simple Roll is likely the most versatile on our list. Good with almost any shoe, the simple roll also works with most fabric types and weights.
Step 1
Take the hem of your pant and make one fold up about two inches.
Step 2
Smooth out the material to make a nice flat cuff.
Step 3
Take the top of the cuff and fold the hem in behind the back, towards the pant leg.
Step 4
Smooth out the cuff to create one uniform fold.
Looks best with:
The Skinny Roll
As its name implies, the Skinny Roll works best with tighter fitting jeans. Like the Pinroll, be sure to stay away from boots and wider-cut sneakers. Also, try to stay away from thicker fabrics, as they don’t fold as tightly and tend to bunch up.
Step 1
Take just the hemmed seam at the bottom of your pant leg and fold it up to create a thin, small cuff.
Step 2
Fold the cuff up again and smooth out the fold.
Step 3
Repeat step 2 until desired length is reached. (Don’t turn your pants into knickers.)
Looks best with:
The Iron Worker
The Iron Worker is the perfect fold for long raw denim or heavyweight canvas pants. This fold looks great with boots and is almost always accompanied by a beard and a flannel.
Step 1
Take the hem of your pant and make a large cuff approximately four and a half to five inches in width.
Step 2
Smooth out the cuff. (Can also be ironed to create a perfect flat fold.)
Step 3
Repeat step two if desired, but never make more than two cuffs with the Iron Worker. Your pants should never be cuffed above your calf unless you are cycling.
Looks best with:
Desert Boot Sand Suede
Clarksclarksusa.com
$150.00
SHOP NOW
Related Stories
As an enthusiast and expert in fashion and clothing, I can provide insights and knowledge into various aspects of styling, garment care, and fashion trends. Regarding the article on cuffing pant legs for style and functionality, the concepts covered are quite comprehensive and cater to different preferences and styles.
Let's break down the key concepts discussed in the article:
-
Inseam Length and Cuffing: Purchasing pants with an inseam length one to two inches longer than your normal inseam allows for a proper cuff without turning the pants into capris. This approach helps in achieving a stylish cuff without compromising the pant's overall length.
-
Denim Weight: Denim weight refers to how much the fabric weighs per yard. Heavier denim (like 12.5 to 14.75 ounces) tends to be more durable and holds cuffs better. However, excessively heavy fabrics might not fold as neatly, leading to a bulky appearance rather than a clean cuff.
-
Pant Cut: While cuffs can be applied to various pant cuts, straight or slightly tapered pants work best for a clean and stylish cuff. Wider or boot-cut styles can also be cuffed but might appear wider due to the additional fabric.
-
Reasons for Cuffing: Cuffing isn't just for style; it can also help prevent fraying at the hem, keeping the jeans in good condition for a longer time. Additionally, cuffing allows adjustment for the length of overly long pants.
-
Different Cuff Styles: The article outlines four popular cuff styles - the Pinroll, Simple Roll, Skinny Roll, and Iron Worker. Each style is suited for different types of shoes, pant fits, and personal preferences, providing versatility in cuffing techniques.
Each cuffing style is detailed with step-by-step instructions, suggesting the ideal type of jeans and shoes to complement the specific cuff.
Moreover, the article emphasizes that cuffing your jeans is not solely about following trends but is also a means of personal expression and a way to maintain the longevity of your clothing.
In summary, cuffing pant legs isn't merely a style choice; it involves understanding denim weights, selecting appropriate pant cuts, considering different cuffing techniques, and using these methods to showcase personal style while preserving the integrity of the clothing.
