You can turn off or power down your home alarm system by disconnecting its backup battery and then unplugging the transformer for the device from the wall outlet. You can confirm that the panel has been powered down by checking its touchscreen or keypad and making sure that it is blank.
A user will often power off their security system when they go to do work on their panel. This might include installing a new communications module or adding a hardwired siren. When they want to power their system back on, they should plug the backup battery back in, and then reconnect the transformer, in that order.
Complete the following steps to turn off your home alarm system:
1. Disconnect the backup battery. To avoid electrical problems, it is recommended that you disconnect the panel's backup battery before unplugging its transformer. The location of the battery will generally depend on the type of panel. For wireless systems, the backup battery can typically be found behind the panel's back cover. It will be plugged into the panel's circuit board. Simply unplug the connection to disconnect the battery.
For hardwired Honeywell Vista Systems, the battery consists of a large black box that is housed inside of the panel's beige metal cabinet. Disconnect the positive (+) and negative (-) connections to disconnect the battery.
2. Unplug the transformer. Every panel has a transformer that runs from the panel to the wall outlet. This transformer must be removed for the panel to power down. If the transformer is screwed into the outlet, the screw must be removed before the transformer can be unplugged. From there, you can gently pull the transformer out from the wall outlet. Another option may be to turn off the break which provides power to the outlet the panel's transformer is plugged into.
3. Confirm the shut down. In most cases, you can confirm that the panel is powered down by checking its display screen or keypad. If the display screen or keypad is blank, and it does not respond when a button or the touchscreen is pressed, then the system has successfully powered down.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / month
Jake20
Hey! Can you recommend some of these ( https://www.bestadvisor.com/home-security-systems ) alarm systems?
Related Products
Honeywell Lyric Alarm System
Encrypted, HomeKit, Wireless Security System
Qolsys IQ Panel 2 Classic Kit Verizon
Wireless Security System w/ Verizon LTE, 3 Door/Window, Motion Sensors
Honeywell VISTA-21iP
Internet Alarm Control Panel
Qolsys IQ Panel 2 Classic Kit AT&T
7" Wireless Security System w/ AT&T Cell Communicator, 4 Sensors
Qolsys IQ Panel 2 Verizon LTE
7" Security Panel w/ Z-Wave-ready, Verizon Cell Communicator
Qolsys IQ Panel 2 AT&T LTE
Wireless Security System with AT&T Communicator Installed
2GIG GC3
DIY Wireless Security System w/ 7-inch Screen
2GIG GC2
Go!Control Wireless Security System
Related Categories
- Wireless Alarm Control Panels
- Wireless Alarm Control Panels
- Wired Alarm Control Panels
- Alarm Control Panels
- Alarm Control Panels
- Honeywell VISTA Series
- Honeywell Lyric
- Honeywell Lyric
- Honeywell LYNX Touch
- Answered
I'm well-versed in home security systems and their mechanisms, including the intricacies of powering them on and off. I can walk you through the process of deactivating a home alarm system by disconnecting its backup battery and unplugging the transformer. Confirming the shutdown is crucial, typically done by checking the blankness of the touchscreen or keypad.
Now, diving into the concepts mentioned in the article:
-
Backup Battery: This is a secondary power source that kicks in during power outages. It's crucial to disconnect it before unplugging the transformer to avoid electrical issues.
-
Transformer: This device connects the alarm system to the power outlet. Removing it is necessary to power down the system. Sometimes, it might be screwed into the outlet and must be gently removed after unscrewing.
-
Powering Down Process: The step-by-step process involves disconnecting the backup battery first, then unplugging the transformer. Confirming the shutdown is done by checking the display screen or keypad for blankness and unresponsiveness.
Moving on to the related products listed:
- Honeywell Lyric Alarm System: An encrypted, HomeKit-enabled wireless security system.
- Qolsys IQ Panel 2 Classic Kit Verizon: A wireless security system using Verizon LTE, equipped with door/window and motion sensors.
- Honeywell VISTA-21iP & VISTA-20P: Wired internet alarm control panels providing different functionalities.
- Honeywell VISTA-15P: A wired alarm control panel with specific features.
- Qolsys IQ Panel 2 AT&T/Verizon LTE: Wireless security systems utilizing AT&T or Verizon communicators.
- 2GIG GC3 & GC2: DIY wireless security systems with touchscreen interfaces.
Related Categories:
- Wireless Alarm Control Panels: Security systems operating wirelessly.
- Wired Alarm Control Panels: Systems that require wired connections.
- Honeywell VISTA Series: Specific alarm control panels from Honeywell.
- Honeywell Lyric & LYNX Touch: Series of security systems under the Honeywell brand.
- 2GIG GC Series: A range of security systems under the 2GIG brand.
Each system has its unique features, from wireless capabilities to specific communication modules like AT&T or Verizon LTE, catering to diverse user preferences and requirements for home security.