The next time you need to move something big and heavy in the workshop or around the house, save your back and build yourself a workshop dolly.
Listen toBOB VILA ON MAKING A DIY DOLLY,or read the text below
Aworkshop dolly is really just a platform on casters. You don’t need expert craftsmanship, special tools, or a lot of time, just simple two-by-fours, some scrap plywood, wood screws and four heavy-duty casters.
For a dolly that’s good and strong, make a rectangle with the two-by-fours, using lap joints at the corners.Attach the casters just below the joints. You can also butt the joints together and add a sheet of scrap plywood over the top to give it stability.
You can staple a little recycled carpet over the dolly to help keep loads from slipping off and to protect delicate finishes. If you plan to leave the loaded dolly in place for any length of time, it’s a good idea to use casters that lock to keep it from rolling.
Adolly like this isn’t just useful in the shop; you can use it to move heavy furniture around the house, to move equipment around at school or at work, or to unload heavy supplies from the car.
Bob Vila Radiois a newly launched daily radio spot carried on more than 60 stations around the country (andgrowing). You can get your dailydose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.
For more on DIY, consider:
5 Kid Friendly DIY Projects
5 “Make in a Weekend” Bookshelf Projects
5 Tips for a Successful DIY